Sunbeam XpressHeat Instructions

Printed in China. www.sunbeam.com Kanga Heating Pad IB_20ESM1.indd 1 Kanga Heating Pad IB_20ESM1.indd 1 C. SWITCH STYLE B. SLIDER STYLE P.N. 200816 Rev A FOR MODELS WITH AUTO-OFF FEATURE: The Auto-Off feature is designed for convenience and to conserve energy by automatically turning off after 2 hours of continuous use. Restart the unit by powering On and selecting desired heat setting. NOTE: After a power outage, the Auto-Off feature automatically resets the timer. *Some models may be 30 min or 1 hr. FOR MODELS WITH XPRESSHEAT Your Sunbeam XpressHeat heating pad features a unique fast-heat technology in which you will feel heat in 30 seconds - for faster pain relief! USING MOIST HEAT THERAPY For deep, penetrating pain relief, use moist heat therapy. When using moist heat therapy, you should protect furniture and clothing from becoming damp. Dampen either side of the removable cover with water by patting the surface with a wet sponge or cloth or use a spray bottle to apply a fine mist. Do not thoroughly soak pad. FOR MODELS THAT INCLUDE MOIST HEAT SPONGE: 1. Remove the moist heat sponge from the fabric cover. 2. Run warm water over the sponge until it is thoroughly saturated. 3. Gently wring out excess water. 4. Place the sponge on top of the vinyl heating pad and ensure the cloth cover is over the heating pad. DANGER: DO NOT IMMERSE PAD IN WATER OR PLACE UNDER RUNNING WATER TO DAMPEN SURFACE. FAILURE TO COMPLY MAY RESULT IN PERSONAL INJURY. NOTICE: If your heating pad has a massage feature, do not use moist heat therapy to prevent damage to the massagers. FOR MODELS WITH COMPACT STORAGE FEATURE: 1. If model has an integrated pocket and securing tab, place the controller in the pocket, roll up pad, and secure with the tab for neat storage. 2. If model has elastic straps, place controller and power cord on pad, roll up pad, and secure it in place with the straps for neat storage. WASHING INSTRUCTIONS CAUTION: DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER! 1. Disconnect pad from outlet. 2. Remove cover from pad. 3. Machine wash only the cover in cool water on gentle cycle, or hand wash. Use mild 4. Hang to dry or machine dry on gentle, cool cycle. 5. Do not wash heating pad. Wipe heating pad with a damp cloth only, as needed. Do not dampen the cord and connector. Hang to dry. TROUBLESHOOTING: • Unplug unit from wall outlet. • No power, controller • Verify no physical damage to the cord, controller or pad. lights are Off • Verify AC outlet is functional. • Plug the unit back into the AC outlet. • Restart the unit by powering On and selecting desired heat • Make sure pad is not folded or bunched in any area. • Pad doesn't get hot • Make sure pad is not folded or bunched up in any area. • Restart the unit by powering On and selecting desired heat • Pad has a hot spot • Make sure pad is not folded or bunched up in any area. • Controller light starts If the controller light starts flashing, follow these steps: • Unplug unit from wall outlet. • Wait for 3 minutes. • Plug the unit back into the AC outlet. • Restart unit by powering On and selecting desired heat setting. • If the error continues, discontinue use. See Warranty information to contact Consumer Services. • Pad has no heat and • Auto-Off feature is set to turn the unit off after 2 hours of controller 'Auto-Off' continuous use. Note: Some models may be 30 min or 1 hr. light is On or flashing • If needed, restart the unit by powering On and selecting desired heat setting. LIMITED WARRANTY

Sunbeam Products, Inc. ("Sunbeam") warrants that this product will be free from defects in material and workmanship, when used in

accordance with the instructions provided for a period of: - One (1) year from the date of initial retail purchase for model 1958 - Two (2) years from the date of initial retail purchase for models with massage feature - Three (3) years from the date of initial retail purchase for model 2008 - Five (5) years from the date of initial retail purchase for all other models with fabric cover

Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.

Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be

made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or

mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of

initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance.

Sunbeam dealers, service centers, or retail stores selling Sunbeam products do not have the right to alter, modify or any way change the terms

and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use

on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an

authorized Sunbeam service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on Sunbeam's Liability?

Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty

or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular

purpose is limited in duration to the duration of the above warranty. Sunbeam disclaims all other warranties, conditions or representations,

express, implied, statutory or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse

of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract,

fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow

the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations

or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to

province, state to state or jurisdiction to jurisdiction. How to Obtain Warranty Service In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800 435-1250 and a convenient service

center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. located in Boca Raton, Florida 33431.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.

FCC CERTIFIED

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful

interference to radio or television reception, which can be determined by turning the product off and on, the user is

encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the product and receiver.

• Connect the product into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's